PVE 6 升級到 7 紀錄 [Jonathan's Wiki 筆記]

本頁是唯讀的，您可以看到原始碼，但不能更動它。您如果覺得它不應被鎖上，請詢問管理員。
====== PVE 6 升級到 7 紀錄 ======
<note>
**實際採用 PEV 6 與 PVE 7 兩組 Cluster 並存的模式移轉運行, 處理紀錄請參考 [[tech/pve6_and_pve7]]**
</note>

<WRAP center round important 60%>
  * 參考 - https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0#Old_Container_and_CGroupv2
  * 升級 cgroup-v2 需要讓 CT 內的 OS 升級至版本 Exp. CentOS 7 -> CentOS 8
  * 強制設定使用舊版 cgroup 似乎不是那容易搞定 [[https://forum.proxmox.com/threads/unified-cgroup-v2-layout-upgrade-warning-pve-6-4-to-7-0.92459/page-2|參考這討論]][[https://pve.proxmox.com/pve-docs/chapter-pct.html#pct_cgroup_compat|這說明]]
  * 因環境有大量 CT 使用 CentOS 7, 考慮升級過程還能讓服務持續運作, 決定採用 PEV 6 與 PVE 7 兩組 Cluster 並存的模式移轉運行
</WRAP>

依照官方的 wiki 說明升級程序, 似乎不太困難, 因此將實際的升級程序操作紀錄在底下

===== 升級程序 =====
==== 預先準備 ====
  - 將現在 PVE 6 所有主機都先生級到最新版本 Exp. 6.4-13 (有更新到 linux-kernel 需要重開機)
  - 有同時安裝 PBS(Proxmox Backup Server)需要先將 PBS 升級到 2.x 參考 [[tech:pbs1to2]]
  - 確定可以穩定存取每一台的參數檔儲存區 (萬一有異常可以直接進去手動修改)
  - 確定目前的 Cluster 是健康穩定狀態
  - 驗證與測試所有 VM 與 CT 的備份都是正確 (萬一出現災難還有降災還原的機會)
  - 確定是正確升級存儲庫的配置
  - 根目錄至少要有 4GB 的磁碟空間
  - [[https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0#Known_upgrade_issues|看一下已知的可能升級議題]]

==== 執行升級 ====
  - 所有主機都執行升級檢測工具 <cli>pve6to7 --full</cli> 如果有使用 CT 裡面是 CentOS7/Ubuntu16 .. 會出現這個警告<file>
WARN: Found at least one CT (103) which does not support running in a unified cgroup v2 layout.
    Either upgrade the Container distro or set systemd.unified_cgroup_hierarchy=0 in the Proxmox VE hosts' kernel cmdline! Skipping further CT compat checks.
</file>
  - 將所有 VM/CT 移到其他主機
  - 避免升級 PVE 7 後會更變 Bridge 的 MAC , 所以可以選擇以下其中一個方式處理:
    * 安裝 ifupdown2 <cli>
apt install ifupdown2 -y
ifreload -a
</cli>
    * 在 /etc/network/interfaces 內針對 vmbr0 ... 進行指定現有的 MAC , Exp. <cli>
:
auto vmbr0
iface vmbr0 inet static
    address 192.168.X.Y/24
    hwaddress aa:bb:cc:12:34
    # ... remaining options
</cli>
  - 更新 apt repo 設定<cli>
apt update
apt dist-upgrade
sed -i 's/buster\/updates/bullseye-security/g;s/buster/bullseye/g' /etc/apt/sources.list
</cli>
  - 進行 Debian Bullseye 與 PVE 7 更新<cli>
apt update
apt dist-upgrade
</cli>出現<cli>Fetched 480 MB in 29s (16.7 MB/s)
W: (pve-apt-hook) !! ATTENTION !!
W: (pve-apt-hook) You are attempting to upgrade from proxmox-ve '6.4-1' to proxmox-ve '7.1-1'. Please make sure to read the Upgrade notes at
W: (pve-apt-hook)       https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0
W: (pve-apt-hook) before proceeding with this operation.
W: (pve-apt-hook)
W: (pve-apt-hook) Press enter to continue, or C^c to abort.
</cli>需要按下**[Enter]**才會繼續更新, 接著出現<cli>apt-listchanges: News
---------------------

apt (2.1.16) unstable; urgency=medium

:
:
</cli>要輸入 **q** 才會繼續更新, 出現<cli>Configuration file '/etc/issue'
 ==> Modified (by you or by a script) since installation.
 ==> Package distributor has shipped an updated version.
   What would you like to do about it ?  Your options are:
    Y or I  : install the package maintainer's version
    N or O  : keep your currently-installed version
      D     : show the differences between the versions
      Z     : start a shell to examine the situation
 The default action is to keep your current version.
*** issue (Y/I/N/O/D/Z) [default=N] ?
</cli>可按下**[Enter]**繼續更新, 在來會彈出一個藍色視窗問<cli> Restart services during package upgrades without asking?</cli>可選 **<Yes>**這樣更版過程就不會一直彈出重啟服務要你確認的訊息, 接著可能會出現<cli>Configuration file '/etc/sysctl.conf'
 ==> Modified (by you or by a script) since installation.
 ==> Package distributor has shipped an updated version.
   What would you like to do about it ?  Your options are:
    Y or I  : install the package maintainer's version
    N or O  : keep your currently-installed version
      D     : show the differences between the versions
      Z     : start a shell to examine the situation
 The default action is to keep your current version.
*** sysctl.conf (Y/I/N/O/D/Z) [default=N] ? Y
</cli>可按下**Y + [Enter]**繼續更新, 再來會彈出一個藍色視窗問<cli>What do you want to do about modified configuration file sshd_config? </cli>可選**keep the local version currently installed**
  - 重新開機就會 PVE 7.x
===== 參考網址 =====
  * https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0

{{tag>pve upgrade}}