差異處

這裏顯示兩個版本的差異處。

連向這個比對檢視

兩邊的前次修訂版 前次修改
下次修改
前次修改
tech:pve6to7 [2022/01/24 16:26] jonathantech:pve6to7 [2022/06/22 08:54] (目前版本) – [執行升級] jonathan
行 1: 行 1:
-====== [draft]PVE 6 升級到 7 紀錄 ======+====== PVE 6 升級到 7 紀錄 ======
 <note> <note>
 **實際採用 PEV 6 與 PVE 7 兩組 Cluster 並存的模式移轉運行, 處理紀錄請參考 [[tech/pve6_and_pve7]]** **實際採用 PEV 6 與 PVE 7 兩組 Cluster 並存的模式移轉運行, 處理紀錄請參考 [[tech/pve6_and_pve7]]**
行 30: 行 30:
 </file> </file>
   - 將所有 VM/CT 移到其他主機   - 將所有 VM/CT 移到其他主機
-  - 避免升級 PVE 7 後會更變 Bridge 的 MAC , 所以如果之前已安裝 ifupdown2 這 PVE 7 採用的方式來進行網路設定, 就直接執行<cli>ifreload -a</cli>, 否則需要在 /etc/network/interfaces 內針對 vmbr0 ... 進行指定現有的 MAC , Exp. <cli>+  - 避免升級 PVE 7 後會更變 Bridge 的 MAC , 所以可以選擇以下其中一個方式處理: 
 +    * 安裝 ifupdown2 <cli> 
 +apt install ifupdown2 -y 
 +ifreload -a 
 +</cli> 
 +    * 在 /etc/network/interfaces 內針對 vmbr0 ... 進行指定現有的 MAC , Exp. <cli>
 : :
 auto vmbr0 auto vmbr0
行 81: 行 86:
 *** sysctl.conf (Y/I/N/O/D/Z) [default=N] ? Y *** sysctl.conf (Y/I/N/O/D/Z) [default=N] ? Y
 </cli>可按下**Y + [Enter]**繼續更新, 再來會彈出一個藍色視窗問<cli>What do you want to do about modified configuration file sshd_config? </cli>可選**keep the local version currently installed** </cli>可按下**Y + [Enter]**繼續更新, 再來會彈出一個藍色視窗問<cli>What do you want to do about modified configuration file sshd_config? </cli>可選**keep the local version currently installed**
-  - 重新開機+  - 重新開機就會 PVE 7.x
 ===== 參考網址 ===== ===== 參考網址 =====
   * https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0   * https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0
  
-{{tag>pve upgrade draft}}+{{tag>pve upgrade}}
  
  • tech/pve6to7.1643012776.txt.gz
  • 上一次變更: 2022/01/24 16:26
  • jonathan